vineri, 16 septembrie 2016

7917 Cleform Gilson 800MP Mortar Mixer

Cleform Gilson 8 cu. ft. Grout Plaster & Mortar Mixer
  • Since 1911, Gilson has been the recognized name in personal, industrial and construction mixing equipment.
  • Free shipping from factory warehouse
  • Paddle system includes 4 drum scrapers and 2 end scrapers on opposed mixing arms
  • Aggressive mixing system with adjustable steel and rubber blades
  • Double belt drive with machined cast iron pulleys
    • Two specially engineered steel blades, provide for smooth and efficient mixing within minutes
    • Discharge height 27.5"
    • Batch Output 700 lbs. 2 bags
    • Drum diameter 28"
    • Honda 5.5 hp or 8.hp OHV with low oil alert.
    • 3 hp Electric dual voltage 115/230 Volts standard.
    • Wheel size 25".
    • 12 gauge steel drum.
    • Drum shaft seals and paddle shaft bearings for easy maintenance.
    • Sturdy steel engine Guard, providing easy and safe engine access.
    • Ball bearings with triple seal.
    • Large user friendly operator devise makes turning a full load of the drum effortless. Locks in various positions.
    • Easy removable toe pole with 2" ball connector.

    Discounted at only: US$ .00



    Publicat de la

    3108 MK-504SG Double Row Diamond Cup Wheel


    MK-504SG Double Row Diamond Cup Wheel
    • For fast grinding of concrete, masonry, stone and other similar materials.
    • Angled segments blow dust away from work area. Fits most hand-held electric or air powered grinders
    • Use when a smoother finish is required.
    • These highly efficient cup wheels are also effective in the process of concrete de-burring and rough-surface grinding
    • Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue
    • Can be used wet or dry. Arbor: threaded 5/8-11
    Discounted at only: US$ .00


    Publicat de la

    9379 Multiquip ST2047B 2in Submersible Pump 220V

    Multiquip ST2047B 2in Submersible Pump 220V

    It's portable, lightweight and reliable in a 230-volt single-phase configuration.
    Multiquip's ST2047B also has improved impeller-wear making it the perfect choice for applications with sandy water and higher heads.

    Features and benefits

    • Double mechanical oil-filled seal minimizes chances of motor damage.
    • Maximum head of 47 feet (14.3 meters).
    • Total weight of 33 pounds (15 kg)
    • Automatic thermo-overload protection.
    • Top flow of 87 gallons (329 liters) a minute.
    Technical features
      Multiquip Water Pump
      ST2037B
      Gallons Per Minute (GPM)
      87 gpm
      Outlet Size (in)
      2 in.
      Inlet Size (in)
      2 in.
      Impeller Disc Size
      2 in.
      Max Head (ft)
      47 ft
      Voltage
      220 Volts
      Starting Amperage
      24.5 Amps
      Running Amperage
      4.9 Amps
      Cable Length
      50 ft
      Overall Height
      15.4 in.
      Pump Diameter
      7.4 in.
      Weight (lb)
      33

      Discounted at only: US$ 569.99



    Publicat de la

    9657 Dynapac BV30 Vibrating Screed

    Dynapac BV30 Screed

    Floor-finishing with the right tools!

    Features

    • Interchangeable bottom plates make this light finishing beam versatile
    • 6 different working widths: 6ft, 8ft, 10ft, 12ft, 14ft, 16ft
      (1.8, 2.4, 3.0, 3.6, 4.8m)
    • Can be equipped with 2 drive units upon request) .
    • Simple operation thanks to an adjustable in-height twin handle,
    • Foldable de-vibrated handle for easy transport.
    • Adjustable centrifugal force for operation on different types of concrete
    • Variable speed
    • Air-cooled, 4 cycle, single cylinder, gas engine

    Technical Data

    • Vibrating unit Honda OHC GX35, 4-stroke engine
    • Power: 1,2 kW (1,6 hp) @ 7000rpm
    Discounted at only: US$ 1495.00


    Publicat de la

    9205 Core Cut CC2500 Accessories

  • Water safety switch, not available on electric saw models or hydraulic saw models without power raise/lower assembly.
  • Spot light.
  • Water pump (electric)
  • Extended blade shaft kit, up to 3/4" to 1-1/2" & 1-1/2" to 2-1/4" spacing
  • Electric or hydraulic raise/lower assembly includes battery and alternator.
  • Propane Conversion Kit for 20hp Honda (4.7 gallon tank)
  • Propane Conversion Kit for 24hp Honda (4.7 gallon tank)
  • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector
  • Blade Guard 14"
  • Blade Guard 20"
  • Blade Guard 26"
  • Propane kits and Raise lower assembly have an additional freight charge.

    • Discounted at only: US$ .00



    Publicat de la

    8313 Northrock Electric Power Units

    Northrock Electric Vibrator Power Units
    • Available in three power option : 1-1/2 hp, 2 hp & 3 hp
    • Free shipping
    • 1-1/2 hp max head diameter 1.75"
      2 hp & 3 hp max head diameter 2-1/2"
    • High strength cast aluminum housing
    • Rugged shock absorbing frame
    • Easy access to all serviceable parts
    • Shaft length and head diameter available up to 2-1/2" in diameter
    • Motor size is selected to maintain an in-material working frequency of about 10,000 Vpm under load
    • Weight: 1-1/2 hp 19 lbs, 2 hp 23 lbs, 3 hp 25 lbs.
    • 1-1/2 hp 13 Amps, 2 hp 15 Amps, 3 hp 19 Amps
    • All Northrock power units may be configured to drive alternate brand shafts and heads
    • Serviceable parts are easily accessible
    • Replacements shaft and heads available form the following brands:
    • Stow, OZTEC, Northrock, Stone, Mikasa (Multiquip), Viber, Master, Wacker, and Wyco.
      •
    • UL/cUL Listed
    Discounted at only: US$ .00


    Publicat de la

    3103 MK-304CG Single Row Diamond Cup Wheel

    MK-304CG Single Row Diamond Cup Wheel
    • MK Diamond's dry-grinding cup wheels have a unique shape which allow for superior form mark removal
    • These highly efficient cup wheels are also effective in the process of concrete de-burring and rough-surface grinding
    • Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue
    • Can be used wet or dry. Arbor: 5/8-11
    Discounted at only: US$ .00


    Publicat de la

    6165 Tomecanic Supercut Tile Cutter

    Tomecanic Supercut Tile Cutter

    General Features
    • Cuts porcelain, floor tile, mosaics, and other materials.
    • 9 ball bearings in the cutting head allow for super accurate and easy scoring.
    • Large breaker and spring loaded pads for easy snapping of tile.
    • Push ceramic tile cutters are designed to score fired clay ceramic tiles that have a thin porcelain coating on their surface (glaze). Stone, fully vitrified porcelain tiles, and some types of unglazed clay tiles may also be cut with this type of cutter. For L cut's or electrical outlet cut-out you will need a quality wet saw to make these types of cuts.
    Discounted at only: US$ .00


    Publicat de la

    6056 MK-215GL Glass Diamond Blade

    MK-215GL Glass Diamond Blade
    • For wet cutting glass & glass blocks.
    • Premium quality, with the highest concentration of diamond.
    • The MK 215-GL is an excellent long life diamond blade specifically engineered for cutting glass with low chipping and material loss.
    • 5/8" Arbor fit wet saws
    • Recommended for Hard Quartz and Blue Stone, as well as glass and glass blocks.
    Discounted at only: US$ .00


    Publicat de la

    9213 Husqvarna Mini Planer CG 200 S

    Highly productive scarifier.
    • Fully adjustable handle in the down position, the Mini-Planer CG 200 S is easy to transport.
    • Removable side cover allows for easy and convenient drum changes.
    • Accepts the full range of steel and tungsten carbide flails/cutters.
    • Unit can be ordered complete with assembled drum and cutters.
    • Compact, rugged and highly portable.
    • Sturdy steel frame with 7-3/4" (197mm) wide cutting path which minimizes the number of passes needed when scarifying or texturing large surface areas.
    • Depth control adjustment wheel is easy to use with limitless settings (wheel includes locking device).
    • Automatic reset to the preset cutting depth.
    • Adjustable cutting head height control and retractable handle for easy transportation.
    • Premium poly V-belt drives power to the drive shaft.
    • 1-1/2" diameter vacuum port allows a dust collection device to be attached.
    • Removable side cover allows for easy replacement of cutter heads with no need to tilt machine.
    • Dual voltage 110v/230v Electric model, 11.5 Amps.
    Ideal For:
    • Sidewalk trip hazard repair
    • Concrete and Coatings removal
    • Floor cleaning and/or preparation
    • Traffic line and markings removal
    • Creating non-slip surfaces
    • Length 27", width 15-1/2"

    Discounted at only: US$ .00



    Publicat de la

    9519 Wacker Single Drum Vibratory Roller

    Wacker Single Drum Vibratory Roller

    Ideal for smaller repair and maintenance jobs
    Lightweight and highly maneuverable roller has infinitely variable hydrostatic drive for in smooth, even accelerations. Excellent choice for the compaction of sand, gravel, soil and asphalt on roadways, walkways, bridges and parking lots. High curb clearance and close side clearance to accommodate work adjacent to curbs and walls.

    Features

  • Rounded edge steel drum has adjustable and reversible polyurethane self-cleaning scrapers to prevent soil and asphalt buildup between the frame and the drum giving smooth and uniform surfaces.
  • Automatic braking system in forward and reverse for operator safety.
  • Transport drive system is fully enclosed, increasing component life for continued operation and higher production. Maintenance-free drum drive is also fully enclosed to eliminate dirt and grease accumulation, reducing service time and increasing productivity.
  • Adjustable, enclosed handle improves operator comfort and folds vertically for convenient transportation and storage.
  • Large anti-rust coated water tank reduces stops for refilling for continued operation and high productivity. Snap-out sprinkling system and in-line filter screen are easily cleaned, reducing downtime.
  • 3,400 lbs centrifugal force
  • RS800A recoil start, RSS800A electric start with recoil back-up.

    • Description Metric Inch
    Operating weight 450 kg 1,000 lb
    Drum diameter 560 mm 22 in
    Drum width 720 mm 28.3 in
    Length x width x height 2.170 x 840 x 1.270 mm 85.5 x 33 x 50 in
    Curb clearance 410 mm 16 in
    Water tank capacity 30 l 8 US gal
    Engine Type air cooled, 4-cycle, single cylinder Honda gasoline
    Starting system 12V Electric & Recoil
    Displacement 337 cm3 20.5 in3
    Max. power output 8,2 kW 11 hp
    Operating speed 2.400 1/min 2,400 rpm
    Fuel consumption 3,5 l/h .9 US gal/h
    Fuel tank capacity 7 l 1.8 US gal
    Total centrifugal force 15,2 kN 3,400 lb
    Frequency 70 Hz 4200 Hz
    Fuel tank capacity 6,5 l 36 US gal
    Dynamic linear force per drum (f/r) 21 N/mm 120 lb/in
    Lift: soil up to 25 cm up to 10 in
    Lift: asphalt up to 10 cm up to 4 in
    Transmission Hydrostatic
    Variable speeds - Forward 0-3,7 km/h 0-2.3 mph
    Variable speeds - Forward 0-61 m/min 0-200 ft/min
    Variable speeds - Reverse 0-2,7 km/h 0-1.7 mph
    Variable speeds - Reverse 0-46 m/min 0-150 ft/min
    Compacted area up to 2.630 m2/h up to 28,300 ft2/h
    Gradeability 15 % 30 %
    Discounted at only: US$ .00


    Publicat de la

    ALR-5 5ft Chisel Scaler & Chisel

    EDCO ALR-5 Chisel Scaler
    Free Shipping

    ALR-5 Features:

      Removes:
      • Tiles (vinyl, ceramic, quarry...)
      • Carpeting
      • Roofing materials
      • Fireproofing
      • Rubber coatings
      • Waterproofing
      • Linoleum
      • Insulation
      • Asbestos
      • Mastics
      • Paint build-up
      • Ice

    • 4" chisel included.
    • Quick-change, hardened steel tool chuck accepts dozens of accessories
    • 5' Long, for floors.
    • Scraper blade available for vinyl floors, wall tile, thin set etc.
    • Weight 16 lbs. 2200 blows per minute.
    • Operates at 90 PSI. Air consumption 4.5 SCFM.
    • Only 1.5 HP compressor required.
    • One year warranty.

      • Discounted at only: US$ 732.00



    Publicat de la

    8302 Kor-It KT77 The Piperider - Heavy-Duty Pipe Tap Core Drill Machines

    Kor-It KT77 "The Piperider" - Heavy-Duty Pipe Tap Core Drill Machines

    The KT77 is designed for both hard-to-reach and standard drilling applications. They have an ideal drill stand for pipe-, floor-, wall- and ceiling-mounted drilling.

    Years of dependable and easy-to-use service

    • Flexible, multipurpose, chain-strap or anchor bolt drilling
    • Smooth, heavy-duty lead screw driven carriage assembly
    • Multiple power sources available
    • Rust-resistant, lightweight aluminum construction
    • Easy alignment for accurate hole drilling

    KT-77-G25 System

    • For drilling at any orientation
    • Standard core-up to 7-inch diameter (6-inch, standard)
    • Carriage travel up to 22 inches (12-inch, standard)
    • Complete chain-strap and anchor bolt drilling systems
    • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
    • Drill stand, 4-cycle, 2.5 hp gasoline motor
    • Throttle control for 100 to 1000 Rpm
    • Chain-strap/anchor bolt base
    • Chain & sprocket drive
    • 6" diameter holes
    • Precision water swivel and chain set

    KT-77-A System

      For any orientation drilling up to 8-inch diameter cores
    • Carriage travel up to 22 inches (12 inch, standard)
    • Complete chain-strap and anchor bolt drilling systems
    • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
    • Drill stand, high-performance pneumatic or hydraulic motor
    • Adjustable flow control for 100 to 1000 bit Rpm
    • Chain-strap/anchor bolt base
    • Chain and sprocket drive
    • 6" diameter holes
    • Precision water swivel
    • Chain-strap set

    KT-712-A System

    • For any orientation drilling up to 12-inch diameter cores
    • Carriage travel up to 22 inches (12 inch, standard)
    • Complete chain-strap and anchor bolt drilling systems
    • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
    • Drill stand, high-performance pneumatic or hydraulic motor
    • Adjustable flow control for 100 to 1000 bit Rpm
    • Chain-strap/anchor bolt base
    • Chain and sprocket drive
    • Precision water swivel
    • Chain set

    Discounted at only: US$ .00



    Publicat de la

    8294 Kor-It K-1600 Flexible Position Receiver Mounted Drilling System

    Kor-It K-1600 Flexible Position Receiver Mounted Drilling System
    • Free shipping

    Reduce job costs

    • Minimize time required for each job
    • Increase bit life with very stable drilling platform
    • Drill faster with gasoline motor : 15 hp and 6 hp pull start

    Receiver Mounted Drilling System

    • Accurate hole drilling - Easy positioning and alignment of drill head
    • Positioning arm swings 180 degrees in a semi-circle
    • Storage position against vehicle bumper for easy transport

    Obtain years of use and dependable performance with stable drilling platform

    • Heavy-duty, dual-precision ground columns
    • Tenzalloy precision machined carriage assembly
    • Smooth-precision ball feed screw system
    • Capable of handling large and small hole drilling
    • Auger capability available

    Standard package includes

    • Variable Rpm: 300 to 1500 bit Rpm
    • Water swivel
    • Drill caddy
    • Receiver mount bracket
    • Drill head

    Independence in the field

    • Stand-alone gasoline-powered system, No additional power supplies needed
    • Mounts to standard 2" receiver hitch of a pickup, van or other vehicle
    • Easy one person vehicle mounting or removal using its own drill caddy

    Discounted at only: US$ .00



    Publicat de la

    7981 Edco 24in Bolt-On Power Trowel Blades

    Edco 24" Bolt-On Power Trowel Blades

  • The Float Blades
    • Are made from an abrasive resistant steel
    • Wide blade with all edges turned up (Blade is used Flat)
    • Blades can be reversed

  • The Combination Blades
    • Will do both floating and finishing operations
    • Blade is not reversable
    • Blade has 3 edges turned which allows it to be used flat or tilted

    Discounted at only: US$ .00



    Publicat de la

    8207 Contrx Systems by Edco Propolish II

    Contrx Systems by Edco Propolish II

    Features:

    • Counter Rotating Flex Head Disc Assembly with Directional Lock-In Accessory System:
    • Patented Click-In Accessory Housing
    • 5 hp, 230 Volt TEFC Motor w/ 385 Rpm Disc Speed
    • Hand-Crank Surface Leveling Fork Assembly: (Light Grinding, Heavy Grinding & Transport Modes)
    • 4 (40 lbs.) Removable Weights & Lifting Bail
    • 23" Working Width with Velcro Accessory Holders
    • Electrical Cord and Vacuum Hose Holder
    • Flip-Up and Wide "T" Handle Assemblies
    • Non-Marking Poly Wheels
    Includes
    • ProPolish II Dual Head Polisher
    • Prep Kit (6 each) - 150 Grit Metal Dots, 50 Grit Metal-Resin Pucks, 120 Grit Resin Pucks, 220 Grit Resin Pucks
    • Polish Kit (6 each) - 400 Grit Resin Pucks, 800 Grit Resin Pucks, 1800 Grit Resin Pucks
    • CONTRx Densifier (5 Gallon)
    • CONTRx Shield (1 Gallon)
    • CONTRx Dye Sprayer (2 Gallons)
    • CONTRx ProPolish Applications Kit - Gloves, Goggles, Mask, Booties, Shield Applicator, Diamond Pad Removal Tool
    Discounted at only: US$ 9650.00


    Publicat de la

    10001 Multiquip MVC88 Mikasa Plate Compactor

    Multiquip MVC88 Mikasa Plate Compactor

    Easy to use, easy to transport, the MVC88 is one of the newest and most technically advanced compactors on the market. The anti-vibration handle design reduces vibration up to 50% compared to other plate compactors.

    • Protective engine guard
    • Sealed belt cover keeps dirt and rocks out of the belt
    • Convenient oil drain for engine oil
    • Cog-tooth belt drive for longer life
    • Self-cleaning plate design minimizes dirt and rock build-up
    • Four lifting handles so plate can be lifted from the side
    • Powered by a 5.5-HP Honda GX-160 (MVC88VGE) or a 5.7-HP Robin EX-17 (MVC88VGH) gasoline engine
    • Optional 2.875 gallon water tank
    • Engine oil shutdown

      • Discounted at only: US$ .00



    Publicat de la
    Abonați-vă la: Postări (Atom)