Single Phase 220V/60Hz
Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.
Features and benefits
- Lightweight, compact design for easy transport and positioning of pump.
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
- Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
- Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
- Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
- Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
- Semi-vortex impeller allows for optimum wear resistance.
| Description | Metric | Inch | ||
| Discharge diameter | 80 | mm | 3 | in |
| Length x width x height | 240 x 240 x 570 | mm | 9.5 x 9.5 x 22.5 | in |
| Operating weight | 29,0 | kg | 64 | lb |
| Max. head | 26 | m | 85 | ft |
| Max. discharge | 493 | l/min | 130 | US gpm |
| Max. pressure | 2,55 | bar | 37 | psi |
| Solid size capacity | 8,5 | mm | 0.3 | in |
| Motor type | Single phase/60 Hz | |||
| Voltage | 220 | V | 220 | V |
| Current (full load/start @ 220V) | 13,0/70,0 | A | 13/70 | A |
| Speed | 3.465 | 1/min | 3,465 | rpm |
| Max. power output | 2,2 | kW | 3 | hp |
| Cable length | 10 | m | 32 | ft |
| Cable size | 2,08 | mm2 | 14 | AWG |
| Impeller material | Ductile iron | |||
| Impeller type | Semi-vortex | |||
